The new PRECISION Torque Screwdriver (Part No. K5500) achieves accurate torque application by eliminating both under and over tightening using anti-slip technology. This enables the user to deliver the correct torque with confidence irrespective of the task and operator experience. Simple torque adjustment can be achieved without the need of any additional specialist tools due to the Quick-Lock adjustment ring on the shaft of the unit. This allows fast and accurate adjustment and at the same time prevents the torque setting accidently being altered during the tool use.
 
The K5500 Torque Screwdriver is a screwdriver with components that ensure tightening to a specified torque, this ensures tightening which is adequate, but not too much. A screw/nut/bolt that is not tightened enough may loosen in operation due to vibration and or moving parts, and excessive tightening can damage parts; for example, if the nuts holding the wheel of a bike in place are too loose, or damaged by over tightening, a wheel may come off at speed damaging the wheel, bike or the rider.

Specifications

The Torque Screwdriver is used in mechanical production, manufacturing, and maintenance; their use is part of quality assurance. The Torque Screwdriver allows the torque to be set to any value within 1-6n.M (13.3 – 48.7 in/lb). This unit has a torque-limiting clutch that disengages once the pre-set torque has been reached. Torque screwdrivers and torque wrenches serve the same purpose, and that is to tighten a fastener to a specific torque where the fastener will perform at its desired function, and that make sure machine components, bicycle components, firearms components, motor bike components, automotive components, model components are securely fastened together and do not loosen unless unscrewed by an operator. The K5500 is suited to any application that requires a low torque setting, some examples are below:
 
• Bicycles – Seat Posts, Stems, Bottle cages and any carbon related equipment etc…
• Automotive – interior parts, aluminium parts and accessories, carbon parts and accessories, fiberglass body parts and accessories etc.
• Motor cycles – fairings and accessories and any carbon related equipment etc….
• Firearms – scopes, scope mounts, stocks
• Machinery
• Electronics
• Any application that requires a low torque setting


• Dial in Torque Setting (Tightens 1 - 6Nm / 13.3 - 48.7 in/lbs)
• Torque Screwdriver slips when desired torque is reached to prevent over tightening
• 'Quick Lock' to prevent accidental adjustment of set torque
• Ergonomic grip handle
• Interchangeable Bits (1/4" Female Hex)

* Check Manufacturer Specifications. Requires Calibration to maintain accuracy.

SKU K5500
Model # K5500
Barcode # 9312753005449
Brand Kincrome
Shipping Weight 0.5400kg
Shipping Width 0.065m
Shipping Height 0.065m
Shipping Length 0.250m

The express warranties referred to below are provided by Kincrome Australia Pty Ltd ACN 007 185 006 (KINCROME) of 3 Lakeview Drive, Caribbean Park, Scoresby, Victoria (Telephone number 1300 657 528).

 

KINCROME AUSTRALIA WARRANTY

Subject to the exclusions set out in these terms, the below products sold and marketed by Kincrome (Kincrome Products) are guaranteed against faulty workmanship and materials on terms set out below.

KINCROME provides a range of express warranty periods for the Kincrome Products it supplies, including but not limited to the following:

  • For KINCROME Professional Quality Tools, you can make a claim under Kincrome's express warranty for the replacement or repair of products which have faulty workmanship or materials for the _lifetime' of the product. 'Lifetime' of the product may vary from product to product.
  • For KINCROME Equipment and SUPATOOL AIR_ products, you can make a claim under Kincrome's express warranty for the replacement or repair of products which have faulty workmanship or materials for 12 MONTHS from the date of purchase.
  • For KINCROME AIR_ products you can make a claim under Kincrome_s express warranty for the replacement or repair of products which have faulty workmanship or materials for 2 YEARS from the date of purchase. (Kincrome Air Compressors are covered under the 12 Month Warranty)

Please refer to the specific warranty document that accompanies the Kincrome Product you have purchased or contact Kincrome for further information.

The benefits conferred by these express warranties are in addition to any other rights and remedies you may have under the Australian Consumer Law and/or other applicable laws.

 

WARRANTY EXCLUSIONS:

Each Kincrome Product is designed and manufactured for a specific purpose. Kincrome express warranties do not cover products that have been used for purposes other than for its intended use, or that is misused, abused or subjected to normal wear and tear, or products which have not been correctly maintained.

Kincrome express warranties also do not apply to the following products:

  • Sockets and accessories used on impact guns (not including impact sockets and accessories)
  • Screwdrivers not used for their intended purpose. For example as chisels or tyre levers
  • Ratchets that have been affected by normal wear and tear or that have been dented, grooved and broken (Repair Kits available separately)
  • Circlip Plier Tips
  • Extension Bars and Flex Handles that have had pipe applied for extra leverage or have been struck with a hammer
  • Storage (except where specified)
  • Taps and Dies
  • Hex / TORX¸* / Tamperproof TORX¸* Keys
  • Power Driving Bits and Impact Driver Bits
  • Hammers and Striking implements including Cold Chisels & Punches
  • Screw and Bolt Extractors
  • Drill Bits
  • Hex / TORX¸* / Tamperproof TORX¸* Bits
  • Consumable products (including but not exclusive to: knife blades, hacksaw blades, drill bits, augers, grinding wheels, tyres, vacuum bags, nozzles, globes, LED's, batteries, fittings, springs, blades, chucks, arbors, chisels, pads / discs, stones, needles, retaining rings, jaws or any other such attachments)
  • Serviceable parts (including but not exclusive to: bearings, seals, filters, spark plugs, globes, belts, batteries, fluids, fittings, springs)
  • Castor wheels / Creeper wheels
  • Bolt Cutter Jaws
  • Electrical, Petrol, Hydraulic and Pneumatic products
  • Kincome express warranties also do not cover damage to or loss of items stored in any Kincrome storage boxes (such as tool boxes or vehicle storage boxes).
  • Defects or other faults arising from normal wear and tear, including on parts or components of the goods.

(* TORX¸ is a registered Trade Mark of Acument Intellectual Properties, LLC)

Be The First To Review This Product!

Help other BJ Bearings Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category